Concrete Lifting and Leveling Before & After Photos

This homeowner was upset with her driveway because the tripping hazards and large cracks on her concrete were an eye sore. She wanted to solve this problem, so after talking to people in the community, she knew that we would be the best people to help her get her driveway back into a good condition. 

We sent System Design Specialist Elliot Christians to inspect the driveway and determine what was causing the problems with her concrete. Elliot found that the homeowner's driveway was suffering because of street creep putting pressure on the concrete and pushing it towards the foundation. As this problem would continue to progress without any solutions, the homeowner knew that she needed to have her driveway fixed quickly, so she scheduled an installation appointment with one of our teams. That installation team used our 2-part Concrete Protection System included PolyLevel foam and NexusPro sealant to lift, level, and seal the driveway. The team also installed Compression Guard to act as a buffer between the street and the driveway to prevent street creep from continuing. 

The homeowner was so happy to have a driveway that she could be proud of again. She even wanted to use our services for waterproofing in the future. Check out her newly restored driveway!

This homeowner was tired of hitting the joints on the concrete while removing snow in the winter. He wanted his driveway to look nice and be easy to shovel for the coming winter, so he decided to give us a call regarding his concrete.

We sent System Design Specialist Luke Miller to inspect the concrete joints an determine where we could help to smooth the concrete. Luke noticed that a couple sections of the driveway had settled slightly, causing a lip that would catch a snow blower or shovel, and also cause a tripping hazard down the road. After discussing this issue with the homeowner, they went ahead and scheduled an installation appointment to get the homeowner's concrete fixed. One of our concrete installation teams came to this home and lifted the settled slabs using PolyLevel foam. The team was able to bring the concrete back to its original location and keep it stabilized. Next, our team sealed the cracks and joints of the concrete using NexusPro sealant to ensure that the driveway looked nice, and to also prevent water or any other material from getting caught in the concrete's joints and cracks. 

The homeowner was very excited with the way that his concrete turned out and he really liked to see it level again. Check out this homeowner's newly leveled concrete!

Michelle recently worked with another company and replaced the concrete on her driveway and front entrance walkway. And to get it fixed, she called Midwest. We were able to get out on site, inspect her concrete, and then start leveling. We lifted the area and stabilized the rest of the walkway with PolyLevel. And then, we sealed all cracks and joints with NexusPro.

The result made it look good as new. And the homeowners were very pleased we had a solution to their frustrating problem!

This homeowner had a large void in his walkway, allowing his concrete to sink. This made it difficult for his family and visitors to use the front entrance, worrying they would trip. He called Midwest for a free inspection to see how we could help. After inspecting it, we reviewed how we could raise his concrete back into place. With Polylevel, our expanding foam, we lifted the slab back into place and ensured no more dirt will be washed away from under the slab. Nexuspro is our caulking and was installed between the cracks and joints to prevent any more water damage under the slab. We were able to get the slab all the way level and back to safe and daily use! 

Kyle kept tripping on his walkway and driveway. Plus running a snowplow over settled concrete was the worst. So he contacted Midwest and liked our solution. Todd King, our System Design Specialist, went out to Kyle's home to see how we could help. 

A few of Kyle's slabs had a lot of voids underneath the concrete, which is what made them sink. His sidewalk was also experiencing settled slabs due to the soil around it. 

To fix this, we used our Concrete Protection System 3. This involves lifting the areas that had fallen with PolyLevel, sealing all the joints and cracks with NexusPro, and then we applied SealantPro to the entire area to prolong the concrete's life and keep water and chemicals from penetrating the concrete.

Kyle was so happy with the final result and best of all, no more tripping hazards!